Failed MOT emissions? MOT Buster Kit for a 2 Litre Petrol, Diesel or Hybrid Engine

Failed MOT on emissions? MOT Emissions Buster Kit for a 2 Litre Petrol, Diesel or Hybrid Engine. Get your engine ready for the MOT with our MOT Emissions Buster kit. This kit contains all you need to cure emissions problems: one 400ml can of Engine Restorer & Lubricant, one 250ml bottle of Motor Cleaner/Flush, one 250ml bottle of Oil Anti-Leak and one 250ml bottle of either Injector Cleaner, Fuel Treatment or Carburetor Cleaner (your choice) -

MOT Emissions Buster kit for a 2 litre Fuel injection Engine consists of the following:

250ml bottle of Ametech RESTORE Motor Cleaner/Engine Flush - Add the bottle of Motor Cleaner to your old engine oil before carrying out an oil change to rid your engine of any nasty deposits of sludge, gums and varnish and to clean the metal surfaces ready for the RESTORE Engine Restorer & Lubricant which you will be adding into the clean oil. One 250ml bottle cleans a sump capacity of 3 to 6 litres.

400ml Ametech RESTORE Engine Restorer & Lubricant - Engine Restorer fills worn areas in the metal surfaces of the friction-producing components of your engine. Wherever your engine oil can reach, the RESTORE CSL particles will reach and as they pass between the friction-producing metal surfaces (e.g. piston rings and cylinder walls) the particles become squashed into scratches, scoring and scuffing caused by miles and years of engine use; the particles, which are spherical in shape, a matrix compound of copper, silver and lead, are flattened into the worn metal, forming a semi-permanent repair to the surface. Restoring the metal surface restores compression, power and performance to the engine, whilst alleviating symptoms of engine wear such as oil-burn and blue smoke, engine noise and increased fuel consumption.

One 400ml can of RESTORE Engine Restorer is enough to treat a 1.5 - 2 litre engine. For an engine size larger than 2 litres, you can add additional cans of Engine Restorer to your order to give you the recommended dosage for your engine. The 'rule of thumb' is 250ml RESTORE per litre of engine size (cc). Add to clean engine oil, with a new filter. RESTORE is compatible with any standard mineral, semi-synthetic or synthetic motor oil, providing there are no friction-reducers (like chlorine, Teflon, PTFE or Moly) in the oil e.g. Slick 50, Prolong, Activ8, Motorup, STP and Wynn’s friction-reducers. We do not recommend adding RESTORE to motor oils containing plant esters such as Castrol Magnatec, or racing formula oils like Silkolene R, which contain positively charged particles which stick to metals. This kind of oil or additive will slow RESTORE down and work against it being successful in the short term, especially if you have limited time to pass an MOT test.

Blue smoke is one of the contributing factors to high emissions detected during an MOT Emissions test. Running RESTORE Engine Restorer & lubricant in your engine for at least 1000 miles or 20 cumulative hours before your car's MOT date is the best chance you have of passing the emissions test. But to be sure, we have included two other products in this kit, which cope with smoke emissions caused by factors other than wear in the engine metal.

IMPORTANT: RESTORE Engine Restorer & Lubricant is recommended for use in both direct injection and common rail diesel engines but is NOT TO BE USED IN HEUI ENGINES.

250ml Ametech RESTORE Oil Anti-Leak - Add Oil Anti-leak to a warm engine oil (while the engine is NOT running) at any time after adding the RESTORE Engine Restorer & Lubricant. It takes between 200 and 500 miles to take effect and what this the Oil Anti-Leak treatment will do is fatten up and rejuvenate the neoprene rubber seals inside the engine. The seals become shrunken and hardened with age and then fail to provide a good seal against leakage of oil. One of the causes of blue smoke on start up, which clears once the engine is warmed up, is oil dripping past shrunken valve stem seals to the top of the piston whilst the car has been allowed to stand for any length of time, e.g. overnight. When the engine is next started, the oil which has dripped through and gathered on top of the piston, burns off, producing blue smoke. Once the engine has warmed sufficiently and the leaked oil has burned away, no blue smoke is seen. Use Oil Anti-leak to eliminate this problem as a cause of unacceptably raised emissions.

250ml Ametech RESTORE Petrol or Diesel Injector Cleaner, Petrol or Diesel Fuel Treatment or Carburetor Cleaner - Lastly, add one whole bottle of either Injector Cleaner, Fuel Treatment or Carburetor Cleaner to a full tank of fuel (40 to 60 litres). You can specify your product choice depending on your fuel type/delivery system from the pick list below before proceeding to check-out. Any of these fuel system additives will clean the entire fuel supply system, including the injectors or carburetor, valves and valve stems, piston heads, fuel pump and will remove carbon deposits, gums, varnishes and resins eliminating blockages and improving fuel delivery and combustion, reducing overfuelling, increasing fuel economy and decreasing CO and CO2 emissions. IMPORTANT: SPECIFY YOUR PRODUCT CHOICE/FUEL TYPE ON THIS PAGE BEFORE PROCEEDING TO CHECKOUT.

What else can I do to improve emissions?

Check and, if necessary, replace air filters and MAF (Mass airflow) sensors (cleaning may be all that's necessary).

If you suspect damaged turbo seals, you may need to get these replaced - consult your mechanic (although RESTORE Engine Restorer can help improve most fledgling turbo seal problems).

Reset the ECU (engine control unit) by disconnecting and reconnecting the battery - this will sometimes solve black smoke emissions on start up.

If you have had a past problem with heavy oil burn which has resulted in your exhaust system becoming oil contaminated, you may be burning off spent oil for some time to come. This will contribute to your exhaust emissions being higher than normal. If this applies to you, you may need to remove the exhaust and clean out or burn off the spent oil before refitting.

EGR (exhaust gas recycling) valves need cleaning or replacing periodically. A stuck EGR valve can contribute to high emissions. If your engine has an EGR valve, check this out.

PLEASE NOTE THAT WE DO NOT SHIP THIS ITEM OUTSIDE THE UK.