A full carton of Litre cans of Ametech's Restore Engine Restorer & Lubricant - that's six cans for £240.00 - just £40.00 each!
Ametech® Engine RESTORE Oil is a life-saver for worn, tired and smoky engines and will balance out compression across the cylinders even in newer engines. RESTORE reduces engine noise and has even been known to cure fledgling bottom-end knock. All used engines, but particularly those that have clocked up more than 40,000 miles, will benefit from the use of RESTORE - after treatment you will notice less smoke, less oil-burn, fewer start-up problems and the engine will run smoother and quieter. You could save a fortune in engine repairs and replacement parts and keep your car running longer and more reliably.
Used in accordance with instructions Ametech® Engine RESTORE Oil has the ability to:
- Cure Blue Smoke and exhaust emissions
- Restore Compression
- Reduce Oil Consumption
- Restore Horsepower and Torque
- Improve MPG
- Improve cold starting ability
- Prolong Engine Life
- Contribute towards reducing Global Warming by reducing CO emissions and extending the useable life of old engines
- Repair fishing boat engines and tractor engines without any downtime.
An EP (extreme pressure) lubricant in its own right, Ametech® Engine RESTORE Oil just needs a standard motor oil to act as a carrier for it in your engine - not friction reducing oils containing plant esters (such as Castrol Magnatec or racing formulas such as Silkolene 'R'), as are formulated to polarise metals and will just repel RESTORE's CSL™ particles, preventing them from reaching the worn metalwork in the engine. RESTORE can also be used in MANUAL gearboxes, where it is helpful in reducing whine by reversing wear in the bronze bearings and reducing 'back-lash' by re-aligning the gears. Do not use RESTORE in automatic gearboxes; we have another product called MT10 Metal Treatment™ which reduces friction and heat in automatic gearboxes, smoothing out the metal and reducing whine.
Ametech® Engine RESTORE Oil is suitable for use in all petrol and diesel engines, with the exception of HEUI engines (hydraulically actuated electronic unit injection engines where the diesel injectors operate off high pressure engine oil). RESTORE is even safe to use in dual-fuelled and lpg engines, engines with turbo-chargers and it has no adverse effect on catalytic converters as it does not enter the combustion cycle. RESTORE should not be used in wet clutch environments or in a Petroil mix (see our FAQs for further information on how to use RESTORE on vehicles with wet clutches and 2 strokes.)
One Litre can of RESTORE will treat up to 4-5 litres of engine capacity or 10 litres of oil in the sump. The rules of thumb for working out the correct dosage for a first-time treatment in your engine are: 200-250ml Ametech Engine RESTORE Oil per litre of engine size (cc); 10% RESTORE by volume to engine oil. Order multiples of this size of can for each 5000cc of engine size you wish to treat. For repeat treatments use half the initial dosage or 5% RESTORE by volume to engine oil. For best results, add to a clean engine with fresh oil and filter. Just shake it up and pour it in! Comprehensive instructions are provided with every purchase.
This size of can has a resealable stopper and is therefor more suitable where repeat doses will be needed over a period of time. It is important to shake the can well before using to agitate the CSL™ particles.
FOR FURTHER INFORMATION PLEASE SEE OUR FAQs